Charger intake hose with OEM part number 1K0145762BA
-
Article №: 3314C0007 OEM part number: 1K0145762BA RIDEX Charger intake hose Rubber with fabric lining, with gaskets/seals, 69mmCar parts maker: RIDEXSuitable for AUDI, SEAT, SKODA, VW, VAG
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Supplementary Article / Supplementary Info: with gaskets/seals
- Diameter [mm]: 69
- Outer Diameter 2 [mm]: 65
- Condition: New
-
Article №: 053-028-016 OEM part number: 1K0145762BA ABAKUS Charger intake hose Rubber with fabric lining, with quick couplersCar parts maker: ABAKUSSuitable for AUDI, SEAT, SKODA, VW, VAG
- Supplementary Article / Supplementary Info Info 2: with quick couplers
- Material: Rubber with fabric lining
- for OE number: 1K0 145 834 L
- Assy./disassy. by qualified personnel required!
- Condition: New
-
Article №: YS-TIH0062H OEM part number: 1K0145762BA YSPARTS Charger intake hose engine sided, LeftCar parts maker: YSPARTSSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: engine sided, Left
- Connection Diameter (pressure side) [mm]: 59
- Connection Diameter (suction side) [mm]: 59
- Condition: New
-
Article №: LTD-1K0145838D OEM part number: 1K0145762BA LTD Charger intake hose Left, Rubber with fabric liningCar parts maker: LTDSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Left
- Material: Rubber with fabric lining
- Connection Diameter (pressure side) [mm]: 59
- Connection Diameter (suction side) [mm]: 59
- Condition: New
-
Article №: GPP-VW-043 OEM part number: 1K0145762BA NTY Charger intake hose Left, Rubber with fabric liningCar parts maker: NTYSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Left
- Material: Rubber with fabric lining
- Connection Diameter (pressure side) [mm]: 59
- Connection Diameter (suction side) [mm]: 59
- Fabrication Number: GPP-VW-043
- Condition: New
-
Article №: F100010 OEM part number: 1K0145762BA DENCKERMANN Charger intake hoseCar parts maker: DENCKERMANNSuitable for AUDI, SEAT, SKODA, VW, VAG
- Hose Length [mm]: 350
- Inner Diameter 2 [mm]: 56, 52
- Condition: New
-
Article №: 24SKV004 OEM part number: 1K0145762BA ESEN SKV Charger intake hose LeftCar parts maker: ESEN SKVSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Left
- Cooling Hose: Charge air cooler to piping, Cold Side
- Weight [kg]: 0,5
- Length [cm]: 42
- Width [cm]: 15
- Height [cm]: 8
- Always compare old and new part (in particular OE No.)
- Condition: New
-
Article №: 24SKV057 OEM part number: 1K0145762BA ESEN SKV Charger intake hose Centre, PE (Polyethylene)Car parts maker: ESEN SKVSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Centre
- Length [mm]: 350
- Colour: black
- Material: PE (Polyethylene)
- Cooling Hose: Piping to engine block, Cold Side
- Inner Diameter 2 [mm]: 56, 52
- Weight [kg]: 0,3
- Always compare old and new part (in particular OE No.)
- Condition: New
-
Article №: P126146 OEM part number: 1K0145762BA PREXAparts Charger intake hoseCar parts maker: PREXApartsSuitable for AUDI, SEAT, SKODA, VW, VAG
-
Article №: P126074 OEM part number: 1K0145762BA PREXAparts Charger intake hoseCar parts maker: PREXApartsSuitable for AUDI, SEAT, SKODA, VW, VAG
-
Article №: V10-2856 OEM part number: 1K0145762BA VAICO Charger intake hose Q+, original equipment manufacturer quality, engine sided, Left, Rubber with fabric liningCar parts maker: VAICOSuitable for AUDI, SEAT, SKODA, VW, VAG
- Connection Diameter (pressure side) [mm]: 59
- Connection Diameter (suction side) [mm]: 59
- Compression ring material: Stainless Steel
- Fitting Position: engine sided, Left
- Material: Rubber with fabric lining
- Weight [kg]: 0,299
- Supplementary Info: Q+, original equipment manufacturer quality
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 23,5
- Condition: New
-
Article №: V10-2700 OEM part number: 1K0145762BA VAICO Charger intake hose Q+, original equipment manufacturer quality, Rubber with fabric liningCar parts maker: VAICOSuitable for AUDI, SEAT, SKODA, VW, VAG
- Connection Diameter (pressure side) [mm]: 55
- Connection Diameter (suction side) [mm]: 55
- Material: Rubber with fabric lining
- for OE number: 1K0 145 762 BA
- Compression ring material: Stainless Steel
- Weight [kg]: 0,43
- Supplementary Info: Q+, original equipment manufacturer quality
- Packaging width [cm]: 7
- Packaging height [cm]: 14
- Packaging Depth [cm]: 29
- Condition: New
-
Article №: V10-5302 OEM part number: 1K0145762BA VAICO Charger intake hose Rubber with fabric lining, with clipCar parts maker: VAICOSuitable for AUDI, SEAT, SKODA, VW, VAG
- Material: Rubber with fabric lining
- Supplementary Article / Supplementary Info Info 2: with clip
- Compression ring material: Stainless Steel
- Weight [kg]: 0,518
- Packaging width [cm]: 17
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 33,7
- Condition: New
The set includes:- Charger intake hose VAICO - 1 (units)
- Holding Clamp, charger air hose VAICO - 1 (units)
- Holding Clamp, charger air hose VAICO - 1 (units)
-
Article №: GT52-779 OEM part number: 1K0145762BA GT-BERGMANN Charger intake hose Left, AEM (Ethylene Acrylate Rubber)Car parts maker: GT-BERGMANNSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Left
- Cooling Hose: Charge air cooler to piping, Cold Side
- Material: AEM (Ethylene Acrylate Rubber)
- Condition: New
-
Article №: 166008 OEM part number: 1K0145762BA NRF Charger intake hose Charge Air CoolerCar parts maker: NRFSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Charge Air Cooler
- Condition: New
-
Article №: 56737 OEM part number: 1K0145762BA AIC Charger intake hose LeftCar parts maker: AICSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Left
- Condition: New
-
Article №: 221914 OEM part number: 1K0145762BA ORIGINAL IMPERIUM Charger intake hose InletCar parts maker: ORIGINAL IMPERIUMSuitable for AUDI, SEAT, SKODA, VW, VAG
- for OE number: 1K0145834L
- Fitting Position: Inlet
- Weight [g]: 512
- Length [mm]: 321
- Inner Diameter 2 [mm]: 56, 52
- Plug connector manufacturer: HENN
- Condition: New
-
Article №: 1451069 OEM part number: 1K0145762BA hajus Autoteile Charger intake hose Throttle Housing, Rear Axle, Lower, Left, engine sided, ACM (Polyacrylate), PE (Polyethylene), AEM (Ethylene Acrylate Rubber), Rubber with fabric lining, with gaskets/seals, with quick couplersCar parts maker: hajus AutoteileSuitable for AUDI, SEAT, SKODA, VW, VAG
- Turbocharger Line: Intake Manifold to piping
- Material: ACM (Polyacrylate), PE (Polyethylene), AEM (Ethylene Acrylate Rubber), Rubber with fabric lining
- Fitting Position: Throttle Housing, Rear Axle, Lower, Left, engine sided
- Supplementary Article / Supplementary Info Info 2: with quick couplers
- Colour: black
- Supplementary Article / Supplementary Info: with gaskets/seals
- Inner Diameter 2 [mm]: 45
- Connection Diameter (pressure side) [mm]: 59
- Connection Diameter (suction side) [mm]: 59
- Condition: New
-
Article №: 09-0205 OEM part number: 1K0145762BA GATES Charger intake hose Polychloroprene (Neoprene)Car parts maker: GATESSuitable for AUDI, SEAT, SKODA, VW, VAG
- Material: Polychloroprene (Neoprene)
- Colour: black
- Hose Length [mm]: 350
- Inner Diameter 2 [mm]: 56, 52
- Observe broschure
- Condition: New
-
Article №: 09-0205C OEM part number: 1K0145762BA GATES Charger intake hose Polychloroprene (Neoprene), with hose clipCar parts maker: GATESSuitable for AUDI, SEAT, SKODA, VW, VAG
- Material: Polychloroprene (Neoprene)
- Supplementary Article / Supplementary Info Info 2: with hose clip
- Colour: black
- Hose Length [mm]: 350
- Inner Diameter 2 [mm]: 56, 52
- Observe broschure
- Condition: New
The set includes:- Charger intake hose GATES - 1 (units)
- Assortment, clamping clips GATES - 1 (units)
- Assortment, clamping clips GATES - 1 (units)
-
Article №: 07.14.070 OEM part number: 1K0145762BA TRUCKTEC AUTOMOTIVE Charger intake hose Rubber with fabric liningCar parts maker: TRUCKTEC AUTOMOTIVESuitable for AUDI, SEAT, SKODA, VW, VAG
- for OE number: 1K0 145 834 L
- Material: Rubber with fabric lining
- Condition: New
-
Article №: R25196 OEM part number: 1K0145762BA RAPRO Charger intake hose Polychloroprene (Neoprene), with hose clipCar parts maker: RAPROSuitable for AUDI, SEAT, SKODA, VW, VAG
- Material: Polychloroprene (Neoprene)
- Supplementary Article / Supplementary Info Info 2: with hose clip
- Colour: black
- Hose Length [mm]: 350
- Inner Diameter 2 [mm]: 56, 52
- Observe broschure
- Condition: New
-
Article №: BTH1075 OEM part number: 1K0145762BA BORG & BECK Charger intake hose Rear Axle, Left, LowerCar parts maker: BORG & BECKSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Rear Axle, Left, Lower
- Colour: black
- Inner Diameter 2 [mm]: 56, 52
- Turbocharger Line: Piping to engine block, Cold Side
- Condition: New
-
Article №: BTH1065 OEM part number: 1K0145762BA BORG & BECK Charger intake hose Right, Lower, Front AxleCar parts maker: BORG & BECKSuitable for AUDI, SEAT, SKODA, VW, VAG
- Fitting Position: Right, Lower, Front Axle
- Colour: black
- Inner Diameter 2 [mm]: 56, 52
- Turbocharger Line: Charge air cooler to piping, Cold Side
- Condition: New
The set includes:- Fastening Clamp, charge air hose BORG & BECK - 1 (units)
- Fastening Clamp, charge air hose BORG & BECK - 1 (units)
-
Article №: SKCHI-2030006 OEM part number: 1K0145762BA STARK Charger intake hose Rubber with fabric lining, with gaskets/seals, 69mmCar parts maker: STARKSuitable for AUDI, SEAT, SKODA, VW, VAG
- Material: Rubber with fabric lining
- Compression ring material: Stainless Steel
- Supplementary Article / Supplementary Info: with gaskets/seals
- Diameter [mm]: 69
- Outer Diameter 2 [mm]: 65
- Condition: New
-
Article №: 16/4134 OEM part number: 1K0145762BA MI.R.A. Charger intake hoseCar parts maker: MI.R.A.Suitable for AUDI, SEAT, SKODA, VW, VAG
- Weight [kg]: 0,552
- Condition: New
-
Article №: 16/3663 OEM part number: 1K0145762BA MI.R.A. Charger intake hoseCar parts maker: MI.R.A.Suitable for AUDI, SEAT, SKODA, VW, VAG
- Weight [kg]: 0,359
- Condition: New
Other OEM numbers:
OEM 1K0199313N, OEM 1K0521101K, OEM 1T0505224F, OEM 1T0853677C9B9, OEM 1T0906093E