Joint kit, drive shaft with OEM part number 391010M970
-
Article №: 24439 OEM part number: 391010M970 SPIDAN Joint kit, drive shaft with crown nut, with grease, 25Car parts maker: SPIDANSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 170
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M22x1.5
- Supplementary Article / Supplementary Info Info 2: with crown nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: New
-
Article №: 841078 OEM part number: 391010M970 GSP Joint kit, drive shaft 25Car parts maker: GSPSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 169
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Specification: Inner groove
- Thread Size: M22X1,5
- Technical Information Number: Groove Type Inner
- Condition: New
-
Article №: 6536 OEM part number: 391010M970 KAMOKA Joint kit, drive shaft Front Axle, 25Car parts maker: KAMOKASuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Fitting Position: Front Axle
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Condition: New
-
Article №: 23K327 OEM part number: 391010M970 SAMKO Joint kit, drive shaft 25Car parts maker: SAMKOSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Specification: Inner
- Diameter [mm]: 90,3
- Condition: New
-
Article №: 62177 OEM part number: 391010M970 JAPKO Joint kit, drive shaft 25Car parts maker: JAPKOSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 169
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Specification: Groove type: INNER
- Condition: New
-
Article №: OJ-NI-0123 OEM part number: 391010M970 EURODRIVELINE Joint kit, drive shaft Wheel Side, Front Axle Left, Front Axle Right, for vehicles without ABS, 25Car parts maker: EURODRIVELINESuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Length [mm]: 169
- External Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 55
- Braking/Drive Dynamics: for vehicles without ABS
- Joint Diameter [mm]: 90
- Condition: New
-
Article №: 62-01-177 OEM part number: 391010M970 ASHIKA Joint kit, drive shaft 25Car parts maker: ASHIKASuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 169
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Specification: Groove type: INNER
- Condition: New
-
Article №: 6225 OEM part number: 391010M970 CEVAM Joint kit, drive shaft Wheel Side, 25Car parts maker: CEVAMSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Fitting Position: Wheel Side
- Length [mm]: 170
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Joint Type: CV Joint
- Thread Size: M22x1.50
- Tripod roller diameter [mm]: 90
- Diameter 2 [mm]: 22
- Bellows Material: NBR (nitrile butadiene rubber)
- Seal Material: NBR (nitrile butadiene rubber)
- Condition: New
-
Article №: 7192 OEM part number: 391010M970 CEVAM Drive shaft 590mmCar parts maker: CEVAMSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 590
- External Toothing wheel side: 25
- External Toothing differential side: 25
- Wheel-sided joint diameter [mm]: 90
- Transmission-sided joint diameter [mm]: 85
- Condition: Remanufactured
-
Article №: KNS327 OEM part number: 391010M970 LPR Joint kit, drive shaftCar parts maker: LPRSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Specification: Inner
- Machined: with groove in inner part (inside)
- Diameter [mm]: 90,3
- Condition: New
-
Article №: 12-060123 OEM part number: 391010M970 ODM-MULTIPARTS Joint kit, drive shaft with retaining ring rear side, 25Car parts maker: ODM-MULTIPARTSSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Supplementary Article / Supplementary Info: with retaining ring rear side
- Condition: New
-
Article №: 302789 OEM part number: 391010M970 LÖBRO Joint kit, drive shaft with crown nut, with grease, 25Car parts maker: LÖBROSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 170
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M22x1.5
- Supplementary Article / Supplementary Info Info 2: with crown nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: New
-
Article №: GI-177 OEM part number: 391010M970 JAPANPARTS Joint kit, drive shaft 25Car parts maker: JAPANPARTSSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 169
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55
- Specification: Groove type: INNER
- Condition: New
-
Article №: T98259 OEM part number: 391010M970 EAI Drive shaft 592mmCar parts maker: EAISuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMALCore exchange £ 7,78 core charge (incl. 20% VAT) is NOT included
The core charge will be refunded if you return the old spare part.
- Length [mm]: 592
- External Toothing wheel side: 25
- External Toothing differential side: 25
- Diameter 2 [mm]: 85
- Diameter 1 [mm]: 90
- Condition: New
-
Article №: CW-2654 OEM part number: 391010M970 OPTIMAL Joint kit, drive shaft 25Car parts maker: OPTIMALSuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 167
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 54,9
- Joint Type: CV Joint
- Machined: with groove in inner part (inside)
- Joint Diameter [mm]: 89
- Condition: New
-
Article №: N1184 OEM part number: 391010M970 SNRA Drive shaft 592mmCar parts maker: SNRASuitable for MITSUBISHI, NISSAN, OM, AKS DASIS, OPTIMAL
- Length [mm]: 592
- External Toothing wheel side: 25
- External Toothing differential side: 25
- Diameter 2 [mm]: 85
- Diameter 1 [mm]: 90
- Condition: New