CAR Clutch kit

Clutch kit: common defects and their signs

  1. Deformation, wear of the driven disk and its elements
    • The clutch is not engaged fully.
    • Vibration occurs at clutch engaging.
    • Burnt smell is noticeable at accelerator pedal pressing.
    • During driving uphill and accelerator pedal pressing the car doesn’t gain speed.
  2. Flywheel wear
    • An effort is required for speeds change.
    • The clutch engages abruptly.
    • Jerks occur during clutch operation.
  3. Damaging of the clutch release bearing, diaphragm or damper springs
    • The clutch is not engaged fully.
    • The clutch fails at turned on gear.
    • Bearing noise occurs at clutch pedal pressing.
    • The clutch pedal jams.

How to repair clutch kit?

On the average, the car clutch kit may serve for 120 000 – 150 000 kilometers of mileage, depending on driving style and operational conditions. Most often breakdowns of the driven disc, its pads, and the clutch release bearing take place. Typically, at one of clutch part defects it is advisable to perform replacement of the whole kit. Firstly, this will allow to significantly save money, and secondly, it will increase efficiency of the whole unit operation.

Replacement of the clutch kit presupposes demounting of the gearbox, actions sequence of which varies for different car models. In rear wheel drive vehicles you need to disconnect the coupling, which connects the gearbox with the propshaft. For front wheel drive cars you need to demount the drive shafts, the gearbox cables, and after that demount the gearbox itself.

The replacement procedure is quite complicated and laborious, requires special knowledge and equipment. It is recommended to entrust such work to service station specialists.

Clutch kit Information

Clutch kit: Bestsellers

-24%
RIDEX Clutch Kit
Article № : 479C0090
Read the product details
Buy RIDEX 479C0090
£ 87,15**
£ 66,23
incl. 20% VAT, excl. delivery costs
  • Diameter [mm]: 215
  • Number of Teeth: 26
  • Supplementary Article/Info 2: with clutch plate, with clutch release bearing
  • Condition: New
In stock
Read the product details
-24%
RIDEX Clutch Kit
Article № : 479C0068
Read the product details
Buy RIDEX 479C0068
£ 114,33**
£ 86,89
incl. 20% VAT, excl. delivery costs
  • Diameter [mm]: 230
  • Number of Teeth: 18
  • Supplementary Article/Info 2: with clutch plate, with clutch release bearing
  • Condition: New
In stock
Read the product details
-24%
RIDEX Clutch Kit
Article № : 479C0023
Read the product details
Buy RIDEX 479C0023
£ 81,99**
£ 62,31
incl. 20% VAT, excl. delivery costs
  • Diameter [mm]: 190
  • Number of Teeth: 19
  • Supplementary Article/Info 2: with clutch release bearing
  • Condition: New
In stock
Read the product details
-24%
RIDEX Clutch Kit
Article № : 479C0034
Read the product details
Buy RIDEX 479C0034
£ 66,75**
£ 50,73
incl. 20% VAT, excl. delivery costs
  • Diameter [mm]: 200
  • Number of Teeth: 18
  • Supplementary Article/Info 2: with clutch plate, with clutch release bearing
  • Condition: New
In stock
Read the product details
-24%
VALEO Clutch Kit
Article № : 832263
Read the product details
Buy VALEO 832263
£ 116,93**
£ 88,87
incl. 20% VAT, excl. delivery costs
  • Product line: KIT3P
  • Diameter [mm]: 200
  • Number of Teeth: 18
  • Condition: New
In stock
Read the product details
-24%
SACHS Clutch Kit
Article № : 2290 601 009
Read the product details
Buy SACHS 2290 601 009
£ 460,92**
£ 350,30
incl. 20% VAT, excl. delivery costs
  • Product line: ZMS Modul XTend plus CSC
  • Diameter [mm]: 240
  • Number of Teeth: 23
  • Condition: New
In stock
Read the product details
-24%
LuK Clutch Kit
Article № : 623 3043 00
Read the product details
Buy LuK 623 3043 00
£ 123,46**
£ 93,83
incl. 20% VAT, excl. delivery costs
  • Product line: BR 0222
  • Diameter [mm]: 230
  • Supplementary Article/Info 2: with clutch release bearing, with clutch plate
  • Condition: New
In stock
Read the product details
-24%
LuK Clutch Kit
Article № : 600 0017 00
Read the product details
Buy LuK 600 0017 00
£ 491,78**
£ 373,75
incl. 20% VAT, excl. delivery costs
  • Product line: BR 0241
  • Supplementary Article/Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
  • Supplementary Article/Supplementary Info: with central slave cylinder, without pilot bearing
  • Condition: New
In stock
Read the product details