Cv boot for FIAT Scudo III Van 1.5 Multijet 120 (506) 88 KW 01.2022
-
Article №: 613-419 CIFAM Bellow Set, drive shaft Wheel Side, Left, RubberCar parts maker: CIFAMSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Fitting Position: Wheel Side, Left
- Number of Gears: 6 Speed
- Transmission Type: Manual Transmission
- Material: Rubber
- Inner Diameter [mm]: 26
- Thread Size: M24x1.5, M24x1,5
- Length [mm]: 106
- Diameter [mm]: 93
- Condition: New
-
Article №: 510132 VEMA CV boot Front axle both sidesCar parts maker: VEMASuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Weight [g]: 73
- Fitting Position: Front axle both sides
- Condition: New
-
Article №: 13-0419 METELLI Bellow Set, drive shaft Left, Wheel Side, Front Axle Left, RubberCar parts maker: METELLISuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Number of Gears: 6 Speed
- Fitting Position: Left, Wheel Side, Front Axle Left
- Transmission Type: Manual Transmission
- Material: Rubber
- Inner Diameter [mm]: 26
- Thread Size: M24x1.5, M24x1,5
- Length [mm]: 106
- Diameter [mm]: 93
- Condition: New
-
Article №: S-JBCV ASTA Mounting Tool, bellowCar parts maker: ASTASuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Width [mm]: 10х1
- Condition: New
-
Article №: S-CVBC ASTA Mounting Tool, bellowCar parts maker: ASTASuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)
- Square Drive Tang Size [mm (inch)]: 12.5 (1/2")
- Vehicle type: VAG, BMW, Mercedes Benz, Honda
- Condition: New
-
Article №: PL7100 PLANET TECH Bellow Set, drive shaft with clamps, with fastening/mounting materialCar parts maker: PLANET TECHSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Supplementary Article / Supplementary Info Info 2: with clamps
- Quantity Unit: Set
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Lubrication: with grease lubrication
- Colour: black
- Diameter from [mm]: 60
- Diameter up to [mm]: 100
- Universal: Yes
- Condition: New
-
Article №: 759.024 METZGER Bellow, driveshaftCar parts maker: METZGERSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Height [mm]: 112
- Inner Diameter 1 from [mm]: 23
- Inner Diameter 1 to [mm]: 28
- Inner Diameter 2 from [mm]: 80
- Inner Diameter 2 to [mm]: 96
- Material: Polychloroprene (Neoprene)
- Condition: New
-
Article №: 0XAT4040 PROFITOOL Mounting Tool, bellowCar parts maker: PROFITOOLSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Weight [kg]: 0.285
- Condition: New
-
Article №: D8518T AUTOFREN SEINSA Bellow Set, drive shaft Wheel Side, 115mmCar parts maker: AUTOFREN SEINSASuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Fitting Position: Wheel Side
- Height [mm]: 115
- Inner Diameter 2 [mm]: 30, 92
- Condition: New
OEM:
-
Article №: CV96 SEALEY CV boot Polychloroprene (Neoprene)Car parts maker: SEALEYSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Inner Diameter [mm]: 56-116
- for shaft diameter [mm]: 19-28
- Material: Polychloroprene (Neoprene)
- Universal: Yes
-
Article №: CVB01 SEALEY CV boot Polychloroprene (Neoprene)Car parts maker: SEALEYSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)
- Inner Diameter [mm]: 56-116
- for shaft diameter [mm]: 19-30
- Material: Polychloroprene (Neoprene)
- Universal: Yes
-
Article №: 0429515 CARPOINT CV boot RubberCar parts maker: CARPOINTSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Inner Diameter [mm]: 70, 105
- Length [mm]: 135
- Material: Rubber
- Universal: Yes
- Packing Type: Blister Pack
- Condition: New
-
Article №: 27730 FEBI BILSTEIN Bellow, driveshaftCar parts maker: FEBI BILSTEINSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Length [mm]: 126
- Diameter [mm]: 21, 60, 72, 82, 83
- Material: Rubber
- Fitting Position: Front Axle, Rear Axle
- Height [mm]: 126
- Weight [kg]: 0,26
- Supplementary Article / Supplementary Info Info 2: with clamps
- Observe service information
- Condition: New
-
Article №: 25988 SPIDAN Bellow, driveshaftCar parts maker: SPIDANSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Inner Diameter 2 [mm]: 21,3, 71
- Height [mm]: 94,7
- Bellows Material: Polychloroprene (Neoprene)
- Version: 1
- Alternative Repair Kit: 190974
- New Part
- Article number of recommended accessories: 25993
- Condition: New
-
Article №: 500445T ERT Bellow Set, drive shaft Wheel Side, 115mmCar parts maker: ERTSuitable for FIAT Scudo III Van 1.5 Multijet 120 (506) (88 KW / 120 HP / from 2022)- Fitting Position: Wheel Side
- Height [mm]: 115
- Inner Diameter 2 [mm]: 30, 92
- Condition: New
OEM:
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Please, wait
-
Ignition and preheating
- Please, wait
-
Suspension
- Please, wait
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Drive shaft
- Tripod hub
- Cv boot
- Cv joint
-
Steering
- Please, wait
-
Air conditioning
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Heating and ventilation
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Towbar / parts
- Please, wait
-
Lighting
- Please, wait
