Flywheel with OEM part number FM516477DD
-
Article №: V25-2635 OEM part number: FM516477DD VAICO Flywheel with screw setCar parts maker: VAICOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of mounting bores: 6
- Transmission Type: Manual Transmission
- Supplementary Article / Supplementary Info Info 2: with screw set
- Condition: New
-
Article №: 415 0537 10 OEM part number: FM516477DD LuK Dual mass flywheelCar parts maker: LuKSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Transmission Type: Manual Transmission
- Number of mounting bores: 6
- Supplementary Article / Supplementary Info Info 2: without screw set, Dual-mass flywheel with friction control plate
- Max. Clearance Angle [Degree]: 19
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
-
Article №: 415 0537 11 OEM part number: FM516477DD LuK Dual mass flywheelCar parts maker: LuKSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Transmission Type: Manual Transmission
- Supplementary Article / Supplementary Info Info 2: with screw set, Dual-mass flywheel with friction control plate
- Number of mounting bores: 6
- Max. Clearance Angle [Degree]: 19
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
-
Article №: 600 0277 00 OEM part number: FM516477DD LuK Clutch kit with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate, with central slave cylinder, with pilot bearingCar parts maker: LuKSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
The set includes:- Central Slave Cylinder, clutch LuK - 1 (units)
- Clutch kit LuK - 1 (units)
- Dual mass flywheel LuK - 1 (units)
-
Article №: 600 0200 00 OEM part number: FM516477DD LuK Clutch kit with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate, with central slave cylinder, without pilot bearingCar parts maker: LuKSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Product line: BR 0241
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
The set includes:- Central Slave Cylinder, clutch LuK - 1 (units)
- Clutch kit LuK - 1 (units)
- Dual mass flywheel LuK - 1 (units)
- Screw Set, flywheel LuK - 1 (units)
-
Article №: 415 0713 10 OEM part number: FM516477DD LuK Dual mass flywheelCar parts maker: LuKSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Transmission Type: Manual Transmission
- Number of mounting bores: 6, 6,0
- Supplementary Article / Supplementary Info Info 2: without screw set, Dual-mass flywheel without friction control plate
- Max. Clearance Angle [Degree]: 12
- Number of teeth (finding the max. clearance angle): 4
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
-
Article №: 6366 000 015 OEM part number: FM516477DD SACHS Dual mass flywheelCar parts maker: SACHSSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without screw set
- Product line: Dual-mass flywheel
- Condition: New
-
Article №: 6366 000 054 OEM part number: FM516477DD SACHS Dual mass flywheelCar parts maker: SACHSSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with flywheel screws
- Condition: New
-
Article №: 836222 OEM part number: FM516477DD VALEO Dual mass flywheelCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Diameter [mm]: 292
- Number of mounting bores: 6
- Supplementary Article / Supplementary Info Info 2: with screw set
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- for flywheel depth [mm]: 62,03
- Weight [kg]: 13,59
- Condition: New
-
Article №: 837305 OEM part number: FM516477DD VALEO Clutch kit with screw set, with lock screw set, with dual-mass flywheel, with central slave cylinderCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Product line: FULLPACK DMF (CSC)
- New Part
- Weight [kg]: 19,2
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- only available in set
- Condition: New
The set includes:- Central Slave Cylinder, clutch VALEO - 1 (units)
- Clutch kit VALEO - 1 (units)
-
Article №: 837605 OEM part number: FM516477DD VALEO Clutch kit with screw set, with lock screw setCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- New Part
- Weight [kg]: 19,26
- Number of mounting bores: 6
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Condition: New
-
Article №: 837440 OEM part number: FM516477DD VALEO Clutch kit with screw set, with lock screw set, without sensor, with dual-mass flywheel, with central slave cylinderCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
-
Article №: 837590 OEM part number: FM516477DD VALEO Clutch kitCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- New Part
- Weight [kg]: 19,12
- Condition: New
-
Article №: 837438 OEM part number: FM516477DD VALEO Clutch kit with screw set, with lock screw set, without sensor, with dual-mass flywheel, with central slave cylinderCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
-
Article №: 837786 OEM part number: FM516477DD VALEO Clutch kit with dual-mass flywheel, with central slave cylinderCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 20,13
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 2
- Condition: New
The set includes:- Central Slave Cylinder, clutch VALEO - 1 (units)
- Clutch kit VALEO - 1 (units)
- Dual mass flywheel VALEO - 1 (units)
-
Article №: 837725 OEM part number: FM516477DD VALEO Clutch kit with dual-mass flywheel, with central slave cylinderCar parts maker: VALEOSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 20,21
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
The set includes:- Central Slave Cylinder, clutch VALEO - 1 (units)
- Clutch kit VALEO - 1 (units)
- Dual mass flywheel VALEO - 1 (units)
-
Article №: DMF566 OEM part number: FM516477DD KAWE Dual mass flywheelCar parts maker: KAWESuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Diameter [mm]: 240
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Vehicle Equipment: for vehicles with manual transmission
- Supplementary Article / Supplementary Info: without pilot bearing
- Supplementary Article / Supplementary Info Info 2: without screw set, with friction control plate
- Number of mounting bores: 6
- Condition: New
-
Article №: 009-001-000128R OEM part number: FM516477DD REMANTE FlywheelCar parts maker: REMANTESuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of mounting bores: 6
- Transmission Type: Manual Transmission
- Weight [kg]: 12,00
- Generally overhauled
- Exchange Part
- Condition: Remanufactured
-
Article №: 009-001-000210R OEM part number: FM516477DD REMANTE Flywheel 240mmCar parts maker: REMANTESuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Diameter [mm]: 240
- Weight [kg]: 12,00
- Generally overhauled
- Exchange Part
- Condition: Remanufactured
-
Article №: ADBP350003 OEM part number: FM516477DD BLUE PRINT Dual mass flywheelCar parts maker: BLUE PRINTSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Hub Inner Diameter [mm]: 33,35
- Hub mounting bore diameter [mm]: 9,50
- Hub Outer Diameter [mm]: 93
- Pitch Circle Diameter, hub [mm]: 66
- Number of hub mounting bores: 6
- Pitch Circle Diameter, clutch pressure plate [mm]: 258
- Inner Diameter Tread [mm]: 142
- Clutch Pressure Plate Outer Diameter [mm]: 244
- Number of clutch pressure plate mounting bores: 6
- Number of Teeth: 113
- Weight [kg]: 12,794
- Observe service information
- Condition: New
-
Article №: ADBP300081 OEM part number: FM516477DD BLUE PRINT Clutch kit with flywheel, with central slave cylinder, with synthetic grease, with dual-mass flywheel, four-piece, 238mmCar parts maker: BLUE PRINTSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Diameter [mm]: 238
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease, with dual-mass flywheel
- Multi-piece: four-piece
- Weight [kg]: 17,894
- Observe service information
- Condition: New
The set includes:- Central Slave Cylinder, clutch BLUE PRINT - 1 (units)
- Clutch kit BLUE PRINT - 1 (units)
- Dual mass flywheel BLUE PRINT - 1 (units)
-
Article №: FDE-FO02 OEM part number: FM516477DD AISIN Flywheel with screw setCar parts maker: AISINSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Supplementary Article / Supplementary Info Info 2: with screw set
- Condition: New
-
Article №: FDE-FD23 OEM part number: FM516477DD AISIN FlywheelCar parts maker: AISINSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
-
Article №: 577F0092R OEM part number: FM516477DD RIDEX REMAN Flywheel 240mm, without screw setCar parts maker: RIDEX REMANSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHSCore exchange £ 41,49 core charge (incl. 20% VAT) is NOT included
The core charge will be refunded if you return the old spare part.
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without screw set
- Condition: New
-
Article №: 479C3389 OEM part number: FM516477DD RIDEX Clutch kit with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate, with central slave cylinder, with pilot bearingCar parts maker: RIDEXSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
-
Article №: SKCK-0101654 OEM part number: FM516477DD STARK Clutch kit with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate, with central slave cylinder, with pilot bearingCar parts maker: STARKSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
-
Article №: FMFD016 OEM part number: FM516477DD EXEDY FlywheelCar parts maker: EXEDYSuitable for FORD, FORD MOTOR COMPANY, LuK, Schaeffler LuK, SACHS