CAR Coolant Flange

Coolant​ ​flange:​ ​common​ ​defects​ ​and​ ​their​ ​signs

  1. Thermal deformation.
    • Lowering of the coolant level.
    • Appearance of leaks on the coolant flange housing and the engine.
    • Failures in operation of the cooling liquid pump.
    • Appearance of specific anti-freeze smell.
  2. Wear-out.
    • Increased anti-freeze consumption.
    • Engine overheating.
    • Leakage of cooling liquid.

How to replace coolant flange?

The broken down coolant flange is irreparable and requires replacement. Vehicle manufacturer recommendations should be taken into account while selecting a new component for a car. Replacement of the cooling system T-pipe can be performed single-handedly, by carrying out the next actions:

  1. After lowering of pressure in the cooling system, open the coolant tank cap and drain coolant.
  2. Carefully disconnect hoses.
  3. During replacement of the front flange, disconnect wiring from the coolant temperature sensor.
  4. Unscrew the flange and carefully remove it.
  5. Prepare location for new part installation: degrease it and grind it with a blade or soft abrasive cloth, if necessary.
  6. Apply a little sealant on a new part and then mount it to its place.
  7. Tighten nuts, adjusting tightening torque in accordance with car technical documentation.
  8. Connect the hoses, fill in the anti-freeze.

Replacement of the flange on the car is usually performed only after cool-down of the engine.

Coolant Flange Information

Coolant Flange: Bestsellers

-20%
TOPRAN Coolant Flange
Article № : 108 197
Read the product details
Buy TOPRAN 108 197
£ 3,21
£ 2,57
incl. 20% VAT, Shipping
  • Fitting Position: Cylinder Head, Timing End, Transmission End
  • Supplementary Article/Info 2: with seal
  • Heating / Cooling: with thermal switch connector

OEM-Number

06 A1 2 113 3D

06 A1 2 113 2

In stock
Read the product details
-20%
JP GROUP Sealing Plug, coolant flange
Article № : 1114550310
Read the product details
Buy JP GROUP 1114550310
£ 1,08
£ 0,86
incl. 20% VAT, Shipping
  • Supplementary Article/Supplementary Info: with accessories
In stock
Read the product details
-20%
TOPRAN Coolant Flange
Article № : 111 242
Read the product details
Buy TOPRAN 111 242
£ 3,61
£ 2,89
incl. 20% VAT, Shipping
  • Supplementary Article/Info 2: with fastening clamp
  • Supplementary Article/Supplementary Info: with seal
  • Fitting Position: Radiator, Upper

OEM-Number

6Q 01 2 229 1E

In stock
Read the product details
-20%
FEBI BILSTEIN Coolant Flange
Article № : 12410
Read the product details
Buy FEBI BILSTEIN 12410
£ 5,47
£ 4,38
incl. 20% VAT, Shipping
  • Material: Plastic
  • Weight [kg]: 0,1

OEM-Number

02 61 2 114 5E

03 71 2 114 5

02 61 2 114 4A

In stock
Read the product details
-20%
JP GROUP Gasket, coolant flange
Article № : 1119606400
Read the product details
Buy JP GROUP 1119606400
£ 1,19
£ 0,95
incl. 20% VAT, Shipping
  • Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
  • Fitting Position: Engine Side
  • Seal Diameter [mm]: 50
In stock
Read the product details
-20%
TOPRAN Coolant Flange
Article № : 108 875
Read the product details
Buy TOPRAN 108 875
£ 1,98
£ 1,58
incl. 20% VAT, Shipping
  • Number of Inlets / Outlets: 4
  • Heating / Cooling: with thermal switch connector
  • Material: GRP (Glass fibre Reinforced Plastic), Polyamid 6.6

OEM-Number

1J 01 2 108 7A

In stock
Read the product details
-20%
FEBI BILSTEIN Gasket, coolant flange
Article № : 18766
Read the product details
Buy FEBI BILSTEIN 18766
£ 2,11
£ 1,69
incl. 20% VAT, Shipping
  • Thickness [mm]: 3,15
  • Inner diameter [mm]: 36,0
  • Material: Elastomer

OEM-Number

03 71 2 168 7

In stock
Read the product details
-20%
FEBI BILSTEIN Gasket, coolant flange
Article № : 12409
Read the product details
Buy FEBI BILSTEIN 12409
£ 0,77
£ 0,62
incl. 20% VAT, Shipping
  • Thickness [mm]: 3,5
  • Inner diameter [mm]: 19,5
  • Material: NBR (nitrile butadiene rubber)

OEM-Number

N9 03 1 680 2

77 00 8 677 92

N9 03 1 680 1

In stock
Read the product details