Anti-roll bar link for MITSUBISHI L200 II Pickup 2.5 D 4WD (K24T) 54 KW 10.1994
-
Article №: 30-73968 DYS Anti-roll bar link Front Axle Left, Front Axle Right, 140mmCar parts maker: DYSSuitable for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T) 2.5 D 4WD (K24T) (54 KW / 73 HP / from 1994)- Fitting Position: Front Axle Left, Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 140
- Material: Cast Steel
- Thread Size 2: M10x1.25
- Weight [kg]: 0,2
- Condition: New
OEM: -
Article №: 30-73633 DYS Anti-roll bar link Front Axle, 60mmCar parts maker: DYSSuitable for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T) 2.5 D 4WD (K24T) (54 KW / 73 HP / from 1994)
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 60
- Material: Cast Steel
- Thread Size 2: M10x1.25
- Weight [kg]: 0,24
- Condition: New
-
Article №: SLK-8030 555 Anti-roll bar link Front Axle Right, Front Axle LeftCar parts maker: 555Suitable for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T) 2.5 D 4WD (K24T) (54 KW / 73 HP / from 1994)- Fitting Position: Front Axle Right, Front Axle Left
- Rod/Strut: Coupling Rod
- Thread Size: R-M10×1,25
- Weight [kg]: 0,25
- Condition: New
-
Article №: 0423-PD8WR FEBEST Anti-roll bar link Rear AxleCar parts maker: FEBESTSuitable for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T) 2.5 D 4WD (K24T) (54 KW / 73 HP / from 1994)- Fitting Position: Rear Axle
- Rod/Strut: Suspension Rod
- Weight [kg]: 0,265
- Transmission Type: Manual Transmission
- Packaging width [cm]: 6,0
- Packaging height [cm]: 4,0
- Condition: New
OEM:
-
Article №: 50-04460 TALOSA Anti-roll bar link Front Axle, 60mmCar parts maker: TALOSASuitable for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T) 2.5 D 4WD (K24T) (54 KW / 73 HP / from 1994)- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 60
- Material: Cast Steel
- Thread Size 2: M10x1.25
- Weight [kg]: 0,24
- Condition: New
-
Article №: MI-411 TEKNOROT Anti-roll bar link Front AxleCar parts maker: TEKNOROTSuitable for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T) 2.5 D 4WD (K24T) (54 KW / 73 HP / from 1994)- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Material: Steel
- Thread Size 1: M10x1,25
- Weight [kg]: 0,244
- Width [mm]: 33
- Height [mm]: 60
- max. length [mm]: 96
- Condition: New
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Please, wait
-
Ignition and preheating
- Please, wait
-
Suspension
- Wheel bearing
- Wheel hub
- Wheel bolts and wheel nuts
- Shaft seal, wheel hub
- Suspension bushes
- Track rod end
- Anti-roll bar link
- Anti-roll bar bushes
- Ball joint
- Repair kit, support- / steering link
- Engine mount
- Leaf spring
- Axle bushes
- Tyre pressure sensor (TPMS)
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Please, wait
-
Steering
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Towbar / parts
- Please, wait
-
Lighting
- Please, wait
Anti-roll bar link for MITSUBISHI L 200 (K3_T, K2_T, K1_T, K0_T)
- 2.5 TD 4WD (K34T) 87 hp 64 kW 1992
- 2.5 D 4WD (K24T) 70 hp 51 kW 1987
- 2.5 D (K14T) 70 hp 51 kW 1986
- 2.0 4WD (K32T, K22T) 102 hp 75 kW 1986
- 2.6 4WD (K33T) 103 hp 76 kW 1989
- 2.0 (K12T, K32T) 102 hp 75 kW 1986
- 2.5 D 4WD (K24T) 75 hp 55 kW 1986
- 2.5 D (K14T) 75 hp 55 kW 1986
- 2.5 TD (K14T) 84 hp 62 kW 1990
- 2.0 (K32T, K12T) 94 hp 69 kW 1987
