Anti-roll bar bushes for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) 51 KW 09.1985
-
Article №: 00444470 TEDGUM Mounting, shock absorbersCar parts maker: TEDGUMSuitable for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) (51 KW / 70 HP / from 1985)- Weight [kg]: 0,008
- Required quantity: 4
- Inner Diameter [mm]: 10
- Diameter [mm]: 25
- Condition: New
OEM: -
Article №: 00447057 TEDGUM Mounting, stabilizer coupling rod Front axle both sidesCar parts maker: TEDGUMSuitable for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) (51 KW / 70 HP / from 1985)
- Weight [kg]: 0,013
- Material: PU (Polyurethane)
- Diameter [mm]: 25
- Colour: red
- Required quantity: 4
- Inner Diameter [mm]: 10
- Length [mm]: 16
- Fitting Position: Front axle both sides
- Shore-A hardness value, base body: 80
- Condition: New
OEM: -
Article №: 00441766 TEDGUM Bearing Bush, stabiliser inner, Front Axle, 14mmCar parts maker: TEDGUMSuitable for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) (51 KW / 70 HP / from 1985)
- Inner Diameter [mm]: 14
- Fitting Position: inner, Front Axle
- Condition: New
OEM:
-
Article №: SBS-5571 KAVO PARTS Bearing Bush, stabiliser 14mmCar parts maker: KAVO PARTSSuitable for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) (51 KW / 70 HP / from 1985)- Length [mm]: 30
- Inner Diameter [mm]: 14
- Condition: New
OEM:
-
Article №: 19544/2 MAPCO Repair Kit, stabilizer coupling rod Rear Axle, 75mmCar parts maker: MAPCOSuitable for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) (51 KW / 70 HP / from 1985)- Fitting Position: Rear Axle
- Quantity Unit: Set
- Rod/Strut: Coupling Rod
- Length [mm]: 75
- External Thread [mm]: M10x1,25
- Required quantity: 1
- Condition: New
OEM: -
Article №: 19543/2HPS MAPCO Repair Kit, stabilizer coupling rod Front axle both sides, 60mmCar parts maker: MAPCOSuitable for MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 (C12V) (51 KW / 70 HP / from 1985)
- Fitting Position: Front axle both sides
- reinforced version
- Quantity Unit: Set
- Rod/Strut: Coupling Rod
- Length [mm]: 60
- External Thread [mm]: M10x1,25
- Required quantity: 1
- Quality: HPS standard
- Condition: New
OEM:
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Please, wait
-
Ignition and preheating
- Please, wait
-
Suspension
- Wheel bearing
- Wheel hub
- Wheel bolts and wheel nuts
- Shaft seal, wheel hub
- Suspension arm
- Suspension bushes
- Camber bolts
- Track rod end
- Steering rack boot
- Anti-roll bar link
- Anti-roll bar bushes
- Anti-roll bar stabiliser kit
- Sway bar
- Ball joint
- Repair kit, support- / steering link
- Engine mount
- Top strut mount and bearing
- Shock absorber dust cover and bump stops
- Shock absorber mounting brackets
- Inner tie rod
- Tyre pressure sensor (TPMS)
- Wheel nuts
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Please, wait
-
Steering
- Please, wait
-
Air conditioning
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Heating and ventilation
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Towbar / parts
- Please, wait
-
Lighting
- Please, wait
