Cv joint for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) 62 KW 06.1988
-
Article №: 51320 BUGIAD Joint kit, drive shaft Wheel Side, 25Car parts maker: BUGIADSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side
- Length [mm]: 156
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 50
- Condition: New
OEM: -
Article №: 51322 BUGIAD Joint kit, drive shaft Wheel Side, 25Car parts maker: BUGIADSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)
- Fitting Position: Wheel Side
- Length [mm]: 153
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Specification: Groove Type: Inner
- Condition: New
-
Article №: 10P5000-JPN JPN Joint kit, drive shaft Wheel Side, 25Car parts maker: JPNSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side
- Length [mm]: 150
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Thread Size: M22
- Diameter [mm]: 79
- Condition: New
OEM:
-
Article №: KMB210 LPR Joint kit, drive shaft Wheel Side, Manual Transmission, for vehicles without ABS, 25Car parts maker: LPRSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Transmission Type: Manual Transmission
- Fitting Position: Wheel Side
- Braking/Drive Dynamics: for vehicles without ABS
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Machined: with groove in inner part (middle)
- Diameter [mm]: 82
- Condition: New
-
Article №: 824003 GSP Joint kit, drive shaft Front Axle, Wheel Side, 25Car parts maker: GSPSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Front Axle, Wheel Side
- Length [mm]: 153
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Thread Size: M22X1,5
- for OE number: 4950724A00
- Technical Information Number: Groove Type Inner
- Condition: New
-
Article №: 17K210 SAMKO Joint kit, drive shaft Wheel Side, Manual Transmission, for vehicles without ABS, 25Car parts maker: SAMKOSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Transmission Type: Manual Transmission
- Fitting Position: Wheel Side
- Braking/Drive Dynamics: for vehicles without ABS
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Machined: with groove in inner part (middle)
- Condition: New
-
Article №: 32-14 498 0002 MEYLE Joint kit, drive shaft ORIGINAL Quality, Wheel Side, Automatic Transmission, Manual Transmission, 25Car parts maker: MEYLESuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side
- Length [mm]: 150,6
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Transmission Type: Automatic Transmission, Manual Transmission
- Sealing Ring Diameter [mm]: 50
- Joint Type: CV Joint
- Supplementary Info: ORIGINAL Quality
- Diameter [mm]: 79,5
- Drive Shaft: without ABS ring
- Surface: Powder coated
- Condition: New
-
Article №: NPZ-MS-001 NTY Joint kit, drive shaft Wheel Side, 25Car parts maker: NTYSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Diameter [mm]: 78,7
- Fabrication Number: NPZ-MS-001
- Condition: New
-
Article №: G15001PC PASCAL Joint kit, drive shaft Wheel Side, 25Car parts maker: PASCALSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Diameter [mm]: 78,7
- Condition: New
-
Article №: 0410-004 FEBEST CV joint Front Axle, Wheel SideCar parts maker: FEBESTSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 50
- Diameter [mm]: 79
- Quantity: 1
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: New
-
Article №: CV-5506 KAVO PARTS Joint kit, drive shaft Wheel Side, Front Axle, 25Car parts maker: KAVO PARTSSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side, Front Axle
- Length [mm]: 153
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Sealing Ring Diameter [mm]: 54
- Condition: New
-
Article №: J2825000 HERTH+BUSS JAKOPARTS Joint kit, drive shaft Front Axle Left, Front Axle Right, Wheel Side, 25Car parts maker: HERTH+BUSS JAKOPARTSSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
- Manufacturer Restriction: NTN Type
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Machined: with groove in inner part (inside)
- Flange Diameter [mm]: 50
- Colour: green
- Condition: New
OEM: -
Article №: J2825001 HERTH+BUSS JAKOPARTS Joint kit, drive shaft Front Axle Left, Front Axle Right, Wheel Side, 25Car parts maker: HERTH+BUSS JAKOPARTSSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)
- Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
- Manufacturer Restriction: MMC Type
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Machined: with groove in inner part (middle)
- Flange Diameter [mm]: 50
- Colour: black
- Condition: New
-
Article №: 62505 JAPKO Joint kit, drive shaft Wheel Side, 25Car parts maker: JAPKOSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Wheel Side
- Length [mm]: 95
- Overall Length [mm]: 155
- External Toothing wheel side: 25
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 50
- Specification: Groove type: MIDDLE
- External Thread [mm]: 22 x 1,5
- Condition: New
-
Article №: CV22061K EAI Joint kit, drive shaft Front Axle, Manual Transmission, 25Car parts maker: EAISuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.5 (C62A) (62 KW / 84 HP / from 1988)- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- External Toothing wheel side: 25
- Internal Toothing wheel side: 22
- Diameter [mm]: 76
- Condition: New
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Please, wait
-
Ignition and preheating
- Please, wait
-
Suspension
- Please, wait
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Drive shaft
- Cv boot
- Drive shaft oil seal
- Cv joint
-
Steering
- Please, wait
-
Air conditioning
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Heating and ventilation
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Lighting
- Please, wait
Cv joint for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A)
- 1.5 12V (C62A) 90 hp 66 kW 1989
- 1.8 GTi 16V (C69A) 140 hp 103 kW 1992
- 1.8 GTi 16V (C68A) 136 hp 100 kW 1989
- 1.8 4WD (C77A) 97 hp 71 kW 1989
- 1.6 16V (C76A, C66A) 113 hp 83 kW 1992
- 1.6 4WD (C76A, C66A) 114 hp 84 kW 1992
- 1.3 12V (C61A) 75 hp 55 kW 1992
- 1.8 D (C64A) 60 hp 44 kW 1988
- 1.5 (C62A) 88 hp 65 kW 1990
