Crankshaft seal for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) 71 KW 09.1989
-
Article №: 572S0011 RIDEX Crankshaft seal frontal sided, FPM (fluoride rubber)/ACM (polyacrylate rubber)Car parts maker: RIDEXSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Fitting Position: frontal sided
- Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Swirl Type: Right-hand Twist
- Dust Cover: with dust lip
- Height 1 [mm]: 7
- Inner Diameter 2 [mm]: 42
- Diameter [mm]: 62
- Condition: New
-
Article №: 572S0012 RIDEX Crankshaft seal transmission sided, FPM (fluoride rubber)/ACM (polyacrylate rubber)Car parts maker: RIDEXSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Fitting Position: transmission sided
- Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Swirl Type: Left-hand Twist
- Dust Cover: with dust lip
- Height 1 [mm]: 7
- Inner Diameter 2 [mm]: 90
- Diameter [mm]: 110
- Condition: New
-
Article №: NJ005 PAYEN Crankshaft seal frontal sided, NBR (nitrile butadiene rubber), 44mmCar parts maker: PAYENSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Fitting Position: frontal sided
- TecDoc Engine Number: 4G37
- Inner Diameter [mm]: 44
- Material: NBR (nitrile butadiene rubber)
- Swirl Type: Right-hand Twist
- Radial Shaft Seal Design: 827S RD
- Height [mm]: 7
- Diameter [mm]: 60
- Condition: New
-
Article №: 8438810 ELWIS ROYAL Crankshaft seal frontal sided, MVQ (silicone rubber), 44mmCar parts maker: ELWIS ROYALSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Inner Diameter [mm]: 44
- Fitting Position: frontal sided
- Material: MVQ (silicone rubber)
- Width [mm]: 7
- Required quantity: 1
- Diameter [mm]: 60
- Condition: New
-
Article №: 8031001 ELWIS ROYAL Crankshaft seal transmission sided, FPM (fluoride rubber), 72mmCar parts maker: ELWIS ROYALSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)
- Inner Diameter [mm]: 72
- Fitting Position: transmission sided
- Material: FPM (fluoride rubber)
- Width [mm]: 9
- Swirl Type: Left-hand Twist
- Radial Shaft Seal Design: AS
- Required quantity: 1
- Diameter [mm]: 96
- Gasket Design: Metal Elastomer Gasket
- Condition: New
-
Article №: 26U0501-JPN JPN Shaft Seal, oil pumpCar parts maker: JPNSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Swirl Type: Right-hand Twist
- Thickness [mm]: 7
- Inner Diameter [mm]: 17
- Diameter [mm]: 28
- Condition: New
-
Article №: 27U5004-JPN JPN Crankshaft seal transmission sided, 72mmCar parts maker: JPNSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)
- Fitting Position: transmission sided
- Engine Code: G37B
- Inner Diameter [mm]: 72
- Width [mm]: 9
- Diameter [mm]: 96
- Condition: New
-
Article №: OS4397 BGA Crankshaft seal frontal sided, NBR (nitrile butadiene rubber), 44mmCar parts maker: BGASuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Inner Diameter [mm]: 44
- Fitting Position: frontal sided
- Material: NBR (nitrile butadiene rubber)
- Height [mm]: 7
- Diameter [mm]: 60
- Condition: New
-
Article №: OS3371 BGA Crankshaft seal transmission sided, NBR (nitrile butadiene rubber), 72mmCar parts maker: BGASuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)
- Inner Diameter [mm]: 72
- Fitting Position: transmission sided
- Material: NBR (nitrile butadiene rubber)
- Height [mm]: 9
- Diameter [mm]: 96
- Condition: New
-
Article №: 8707128 KAMOKA Crankshaft seal frontal sidedCar parts maker: KAMOKASuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Fitting Position: frontal sided
- for manufacturer number: 8707128
- Condition: New
-
Article №: 8707083 KAMOKA Crankshaft seal transmission sidedCar parts maker: KAMOKASuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)
- Fitting Position: transmission sided
- for manufacturer number: 8707083
- Condition: New
-
Article №: SKSSC-2070010 STARK Crankshaft seal frontal sided, FPM (fluoride rubber)/ACM (polyacrylate rubber)Car parts maker: STARKSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Fitting Position: frontal sided
- Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Swirl Type: Right-hand Twist
- Dust Cover: with dust lip
- Height 1 [mm]: 7
- Inner Diameter 2 [mm]: 42
- Diameter [mm]: 62
- Condition: New
-
Article №: 15001600 AJUSA Shaft Seal, oil pumpCar parts maker: AJUSASuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Thickness [mm]: 7
- Inner Diameter [mm]: 17
- Diameter [mm]: 28
- Swirl Type: Right-hand Twist
- Material: FPM (fluoride rubber)
- Condition: New
-
Article №: 15001500 AJUSA Crankshaft seal 17mmCar parts maker: AJUSASuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)
- Inner Diameter [mm]: 17
- Swirl Type: Right-hand Twist
- Height 1 [mm]: 7
- Height 2 [mm]: 13
- Diameter [mm]: 28
- Condition: New
-
Article №: OS005 FAI AutoParts Crankshaft seal frontal sided, 44mmCar parts maker: FAI AutoPartsSuitable for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) 1.8 4WD (C77A) (71 KW / 97 HP / from 1989)- Fitting Position: frontal sided
- TecDoc Engine Number: 4G37
- Inner Diameter [mm]: 44
- Height [mm]: 7
- Diameter [mm]: 60
- Condition: New
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Timing belt kit
- Timing belt
- Timing belt tensioner
- Timing belt tensioner pulley
- Timing cover gasket
- Serpentine belt
- V-belt
- Piston rings
- Piston
- Full engine gasket set
- Crankshaft bearing
- Crankshaft seal
- Main bearings, crankshaft
- Crankcase gasket
- Head gasket
- Rocker cover gasket
- Tappet
- Camshaft
- Head bolts
- Valve guides
- Valve stem seals
- Rocker arm
- Camshaft seal
- Oil cap
- Seal, oil filler cap
- Mass air flow sensor (MAF)
- Throttle position sensor
- PCV valve
- Seal, crankcase breather
- Intake manifold gasket
- Exhaust manifold gasket
- Oil pump
- Sump gasket
- Sump plug
- Oil drain plug gasket
- Oil pressure sensor
- Engine oil
- Shaft seal, oil pump
- Engine electrics
- Lambda sensor
- Crankshaft sensor
- Injectors
- Injector seals
- Water pump
- Thermostat
- Coolant temperature sensor
- Engine coolant
- Radiator
- Coolant flange
- Thermostat gasket
- Expansion tank cap
- Coolant circuit seals
- Radiator fan switch
- Radiator cap
- Ignition coil
- Spark plugs
- Ignition leads
- Distributor cap
- Distributor rotor
- Ignition module
- Oil filter
- Fuel filter
- Air filter
- Cylinder head gasket set
-
Ignition and preheating
- Please, wait
-
Suspension
- Please, wait
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Please, wait
-
Steering
- Please, wait
-
Air conditioning
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Heating and ventilation
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Towbar / parts
- Please, wait
-
Lighting
- Please, wait
Crankshaft seal for MITSUBISHI Lancer IV Hatchback (C6_A, C7_A)
- 1.5 12V (C62A) 90 hp 66 kW 1989
- 1.8 GTi 16V (C69A) 140 hp 103 kW 1992
- 1.8 GTi 16V (C68A) 136 hp 100 kW 1989
- 1.6 16V (C76A, C66A) 113 hp 83 kW 1992
- 1.5 (C62A) 84 hp 62 kW 1988
- 1.6 4WD (C76A, C66A) 114 hp 84 kW 1992
- 1.3 12V (C61A) 75 hp 55 kW 1992
- 1.8 D (C64A) 60 hp 44 kW 1988
- 1.5 (C62A) 88 hp 65 kW 1990
