Suspension arm for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) 206 KW 08.1996
-
Article №: 273C0296 RIDEX Suspension arm Front Axle, Left, Lower, Steel, Control Arm, with rubber mountCar parts maker: RIDEXSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Front Axle, Left, Lower
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Condition: New
OEM:
-
Article №: A37-9537 ACKOJA Suspension arm Front Axle Left, Sheet Steel, Control ArmCar parts maker: ACKOJASuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 83,3
- paired article number: A37-9538
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging height [cm]: 8,7
- Packaging Depth [cm]: 53,7
- Condition: New
OEM: -
Article №: A37-0189 ACKOJA Suspension arm Rear Axle Right, Control ArmCar parts maker: ACKOJASuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)
- Fitting Position: Rear Axle Right
- Control/Trailing Arm Type: Control Arm
- paired article number: A37-0190
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Condition: New
OEM:
-
Article №: 4214320 KRAFT Rod / Strut, wheel suspension Rear Axle LeftCar parts maker: KRAFTSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Rear Axle Left
- Rod/Strut: Push Rod
- Production Number: K4214320
- Condition: New
OEM:
-
Article №: S060618 GSP Suspension arm Rear Axle Right, Upper, Control ArmCar parts maker: GSPSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Rear Axle Right, Upper
- Control/Trailing Arm Type: Control Arm
- paired article number: S060617
- Condition: New
OEM: -
Article №: S060617 GSP Suspension arm Rear Axle Left, Upper, Control ArmCar parts maker: GSPSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)
- Fitting Position: Rear Axle Left, Upper
- Control/Trailing Arm Type: Control Arm
- paired article number: S060618
- Condition: New
OEM:
-
Article №: 72-2302 MAXGEAR Suspension arm Rear Axle Right, Steel, Sheet Steel, Control Arm, without ball joint, with bearing(s)Car parts maker: MAXGEARSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Rear Axle Right
- Material: Steel, Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 225
- paired article number: 72-2303
- Supplementary Article / Supplementary Info Info 2: without ball joint, with bearing(s)
- Inner Diameter [mm]: 12
- Diameter [mm]: 36
- Condition: New
OEM:
-
Article №: MI-WP-2769 MOOG Suspension arm Rear Axle, Left, Lower, Control Arm, with rubber mountCar parts maker: MOOGSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Rear Axle, Left, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: MI-WP-2770
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 41,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Condition: New
OEM: -
Article №: MI-WP-2770 MOOG Suspension arm Rear Axle, Right, Lower, Control Arm, with rubber mountCar parts maker: MOOGSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)
- Fitting Position: Rear Axle, Right, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: MI-WP-2769
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 41,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Condition: New
OEM:
-
Article №: 210381 A.B.S. Suspension arm Rear Axle Right, outer, Upper, Steel, Trailing Arm, with rubber mount, without ball jointCar parts maker: A.B.S.Suitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Rear Axle Right, outer, Upper
- Material: Steel
- Control/Trailing Arm Type: Trailing Arm
- Length [mm]: 225
- paired article number: 210380
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 0,76
- as standard
- Condition: New
OEM: -
Article №: 210380 A.B.S. Suspension arm Rear Axle Left, outer, Upper, Steel, Trailing Arm, with rubber mount, without ball jointCar parts maker: A.B.S.Suitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)
- Fitting Position: Rear Axle Left, outer, Upper
- Material: Steel
- Control/Trailing Arm Type: Trailing Arm
- Length [mm]: 225
- paired article number: 210381
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 0,76
- as standard
- Condition: New
OEM:
-
Article №: 90Z0A79-OYO Oyodo Suspension arm Lower, Rear Axle both sides, Control ArmCar parts maker: OyodoSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Lower, Rear Axle both sides
- Control/Trailing Arm Type: Control Arm
- Condition: New
-
Article №: 71079 SIDEM Rod / Strut, wheel suspension Rear Axle RightCar parts maker: SIDEMSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Rear Axle Right
- Length [mm]: 225
- Control/Trailing Arm Type: Trailing Arm
- Rod/Strut: Push Rod
- Observe service information
- paired article number: 71078
- Condition: New
OEM:
-
Article №: CQM-4R CTR Suspension arm Rear Axle Upper, Right, Lower Front Axle, Steel, Control ArmCar parts maker: CTRSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)- Fitting Position: Lower Front Axle, Right, Rear Axle Upper
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Weight [g]: 800
- Packaging width [cm]: 10
- Packaging height [cm]: 9
- Gross Weight [g]: 940
- Condition: New
OEM: -
Article №: CQM-4L CTR Suspension arm Rear Axle Upper, Left, Lower Front Axle, Steel, Control ArmCar parts maker: CTRSuitable for MITSUBISHI Lancer VI Saloon (CJ_, CP_) EVO IV (CN9A) (206 KW / 280 HP / from 1996)
- Fitting Position: Lower Front Axle, Left, Rear Axle Upper
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Weight [g]: 800
- Packaging width [cm]: 10
- Packaging height [cm]: 9
- Gross Weight [g]: 940
- Condition: New
OEM:
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Please, wait
-
Ignition and preheating
- Please, wait
-
Suspension
- Wheel bearing
- Wheel hub
- Wheel bolts and wheel nuts
- Suspension arm
- Suspension bushes
- Suspension kit
- Camber bolts
- Track rod end
- Steering rack boot
- Steering mounting
- Anti-roll bar link
- Anti-roll bar bushes
- Sway bar
- Ball joint
- Repair kit, support- / steering link
- Engine mount
- Top strut mount and bearing
- Shock absorber dust cover and bump stops
- Spring cap
- Leaf spring
- Axle bushes
- Wheel spacers
- ABS sensor
- Inner tie rod
- Abs ring
- Tyre pressure sensor (TPMS)
- Wheel nuts
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Please, wait
-
Steering
- Please, wait
-
Air conditioning
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Heating and ventilation
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Lighting
- Please, wait
Suspension arm for MITSUBISHI Lancer VI Saloon (CJ_, CP_)
- 1.3 12V (CK1A) 75 hp 55 kW 1995
- EVO VI (CP9A) 280 hp 206 kW 1999
- EVO V (CP9A) 280 hp 206 kW 1998
- 1.6 16V (CK4A) 90 hp 66 kW 1995
- 1.5 16V (CK2A) 110 hp 81 kW 1995
- 1.5 16V (CK2A) 94 hp 69 kW 1999
- 1.5 12V (CK2A) 94 hp 69 kW 1996
- 1.8 16V 205 hp 151 kW 1995
- 1.5 101 hp 74 kW 2000
- EVO V - RS450 Ralliart (CP9A) 456 hp 336 kW 1998
