Wheel nuts for VW Crafter Minibus (SY) 2.0 TDI 103 KW 09.2016
-
Article №: 44869 FEBI BILSTEIN Wheel Nut 19Car parts maker: FEBI BILSTEINSuitable for VW CRAFTER Bus (SY_) 2.0 TDI (103 KW / 140 HP / from 2016)- Spanner Size: 19
- Wheel Fastening: Flat Seat
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 18
- Quality/ Grade: 10
- Surface: Zink flake coated
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0,040
- Observe service information
- Rims: for steel rims
- Material: Steel
- Diameter [mm]: 30
- for OE number: 000 401 18 72
- Internal Thread Size: M14 x 1,5
- Condition: New
-
Article №: 46707 FEBI BILSTEIN Wheel Nut 19Car parts maker: FEBI BILSTEINSuitable for VW CRAFTER Bus (SY_) 2.0 TDI (103 KW / 140 HP / from 2016)
- Spanner Size: 19
- Wheel Fastening: Flat Seat
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 18
- Quality/ Grade: 10
- Surface: Zink flake coated
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0,040
- Observe service information
- Rims: for steel rims
- Material: Steel
- Diameter [mm]: 30
- for OE number: 000 401 18 72
- Internal Thread Size: M14 x 1,5
- Condition: New
-
Article №: 10 94 4869 SWAG Wheel Nut 19Car parts maker: SWAGSuitable for VW CRAFTER Bus (SY_) 2.0 TDI (103 KW / 140 HP / from 2016)- Spanner Size: 19
- Wheel Fastening: Flat Seat
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 18
- Quality/ Grade: 10
- Surface: Zink flake coated
- Bolt Head-/Nut Design: Male Hex
- Rims: for steel rims
- Material: Steel
- Diameter [mm]: 30
- for OE number: 000 401 18 72
- Internal Thread Size: M14 x 1,5
- Condition: New
-
Article №: 561-3001 TIPTOP Wheel Nut 19, M12 x 1,5Car parts maker: TIPTOPSuitable for VW CRAFTER Bus (SY_) 2.0 TDI (103 KW / 140 HP / from 2016)- Spanner Size: 19
- Fitting Position: Front Axle, Rear Axle
- Surface: Zinc-coated
- Thread Size: M12 x 1,5
- Colour: chrome
- Material: Steel
- Length [mm]: 35
- Condition: New
-
Article №: 561-3003 TIPTOP Wheel Nut 21, M12 x 1,5Car parts maker: TIPTOPSuitable for VW CRAFTER Bus (SY_) 2.0 TDI (103 KW / 140 HP / from 2016)
- Spanner Size: 21
- Fitting Position: Front Axle, Rear Axle
- Surface: Zinc-coated
- Thread Size: M12 x 1,5
- Colour: chrome
- Length [mm]: 37
- Condition: New
-
Article №: OP-UWN10025-1 OPTIMAL Wheel Nut 19Car parts maker: OPTIMALSuitable for VW CRAFTER Bus (SY_) 2.0 TDI (103 KW / 140 HP / from 2016)- Spanner Size: 19
- Wheel Fastening: Flat Seat
- Fitting Position: Rear Axle, Front Axle
- Quality/ Grade: 10
- Surface: Zink flake coated
- Bolt Head-/Nut Design: Male Hex
- Rims: for steel rims
- Material: Steel
- Height [mm]: 18
- Diameter [mm]: 30
- Internal Thread Size: M14x1,5
- Condition: New
Car part
-
Brakes
- Please, wait
-
Filters
- Please, wait
-
Engine
- Please, wait
-
Ignition and preheating
- Please, wait
-
Suspension
- Wheel bearing
- Wheel hub
- Wheel bolts and wheel nuts
- Suspension arm
- Suspension bushes
- Suspension kit
- Camber bolts
- Track rod end
- Steering rack boot
- Anti-roll bar link
- Anti-roll bar bushes
- Anti-roll bar stabiliser kit
- Ball joint
- Top strut mount and bearing
- Shock absorber dust cover and bump stops
- Leaf spring
- ABS sensor
- Inner tie rod
- Abs ring
- Tyre pressure sensor (TPMS)
- Wheel nuts
-
Damping
- Please, wait
-
Body
- Please, wait
-
Wiper and washer system
- Please, wait
-
Electrics
- Please, wait
-
Exhaust
- Please, wait
-
Engine cooling system
- Please, wait
-
Clutch
- Please, wait
-
Belts, chains, rollers
- Please, wait
-
Interior
- Please, wait
-
Fuel supply system
- Please, wait
-
Drive shaft and cv joint
- Please, wait
-
Steering
- Please, wait
-
Air conditioning
- Please, wait
-
Sensors, relays, control units
- Please, wait
-
Heating and ventilation
- Please, wait
-
Oils and fluids
- Please, wait
-
Gaskets and sealing rings
- Please, wait
-
Gearbox
- Please, wait
-
Pipes and hoses
- Please, wait
-
Repair kits
- Please, wait
-
Bearings
- Please, wait
-
Propshafts and differentials
- Please, wait
-
Towbar / parts
- Please, wait
-
Lighting
- Please, wait
