Clutch kit with OEM part number 1233682
-
Article №: 10612 OEM part number: 1233682 MAPCO Clutch kit with clutch disc, with flywheel, with clutch pressure plate, without central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: MAPCOSuitable for FORD, LuK, SACHS
- Diameter 1 [mm]: 240
- Diameter 2 [mm]: 239
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Hub Profile: 22,9 x 25,9
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- New part without deposit
- Condition: New
-
Article №: SL 4DS1300 OEM part number: 1233682 STARLINE Clutch kit without clutch release bearing, with flywheel, with clutch disc, with clutch pressure plate, Conversion from dual-mass flywheel to single-mass flywheel, 240mmCar parts maker: STARLINESuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 22,9 x 25,9
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
-
Article №: DMF228 OEM part number: 1233682 KAWE Dual mass flywheelCar parts maker: KAWESuitable for FORD, LuK, SACHS
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Vehicle Equipment: for vehicles with manual transmission
- Supplementary Article / Supplementary Info: without pilot bearing
- Supplementary Article / Supplementary Info Info 2: without screw set, with friction control plate
- Number of mounting bores: 8
- Condition: New
-
Article №: DMV244M OEM part number: 1233682 KAWE Clutch kit with clutch disc, with flywheel, with bolts, with clutch pressure plate, Conversion from dual-mass flywheel to single-mass flywheel, 240mmCar parts maker: KAWESuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel, with bolts
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 26 x 23
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- only in connection with: 962881
- Condition: New
-
Article №: KC124 OEM part number: 1233682 KAMOKA Clutch kit without clutch release bearing, Requires special tools for mounting, with flywheel, with clutch disc, with screw set, with clutch pressure plate, for engines with dual-mass flywheelCar parts maker: KAMOKASuitable for FORD, LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Requires special tools for mounting, with flywheel, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Condition: New
-
Article №: 2294 501 078 OEM part number: 1233682 SACHS Dual mass flywheelCar parts maker: SACHSSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with flywheel screws
- Product line: Dual-mass flywheel
- Condition: New
-
Article №: 2294 001 505 OEM part number: 1233682 SACHS Dual mass flywheelCar parts maker: SACHSSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with flywheel screws
- Product line: Dual-mass flywheel
- Condition: New
-
Article №: NZS-FR-002 OEM part number: 1233682 NTY Clutch kit with flywheel, with screw set, without central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: NTYSuitable for FORD, LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Model Year from: 2003
- Fabrication Number: NZS-FR-002
- Condition: New
-
Article №: STO1051 OEM part number: 1233682 STORM QUALITY PARTS Clutch kit with clutch disc, without clutch release bearing, with screw set, with single-mass flywheel, with clutch pressure plate, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: STORM QUALITY PARTSSuitable for FORD, LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, with screw set
- Supplementary Article / Supplementary Info: with single-mass flywheel, with clutch pressure plate
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Additionally required articles (article numbers): 9940
- Condition: New
-
Article №: 415 0378 10 OEM part number: 1233682 LuK Dual mass flywheelCar parts maker: LuKSuitable for FORD, LuK, SACHS
- Transmission Type: Manual Transmission
- Number of mounting bores: 8
- Supplementary Article / Supplementary Info Info 2: without screw set, Dual-mass flywheel with friction control plate
- Max. Clearance Angle [Degree]: 16
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
-
Article №: 415 0168 10 OEM part number: 1233682 LuK Dual mass flywheelCar parts maker: LuKSuitable for FORD, LuK, SACHS
- Transmission Type: Manual Transmission
- Number of mounting bores: 8
- Supplementary Article / Supplementary Info Info 2: without screw set, Dual-mass flywheel with friction control plate
- Max. Clearance Angle [Degree]: 14
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
-
Article №: 600 0047 00 OEM part number: 1233682 LuK Clutch kit with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate, with central slave cylinder, without pilot bearingCar parts maker: LuKSuitable for FORD, LuK, SACHS
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Product line: BR 0241
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 14
- Number of mounting bores: 8
- Condition: New
-
Article №: 600 0246 00 OEM part number: 1233682 LuK Clutch kit with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate, with central slave cylinderCar parts maker: LuKSuitable for FORD, LuK, SACHS
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder
- Product line: BR 0241
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 14
- Number of mounting bores: 8
- Condition: New
The set includes:- Central Slave Cylinder, clutch LuK - 1 (units)
- Clutch kit LuK - 1 (units)
- Clutch kit LuK - 1 (units)
- Dual mass flywheel LuK - 1 (units)
- Screw Set, flywheel LuK - 1 (units)
-
Article №: MK40032 OEM part number: 1233682 MECARM Clutch kit 240mmCar parts maker: MECARMSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Condition: New
-
Article №: LKCA640055F OEM part number: 1233682 LUCAS Clutch kit 241mmCar parts maker: LUCASSuitable for FORD, LuK, SACHS
- Diameter [mm]: 241
- Number of Teeth: 23
- Weight [kg]: 16,600
- Number of Parts [parts]: 3
- Condition: New
-
Article №: F1G147NX OEM part number: 1233682 NEXUS Clutch kit 239mmCar parts maker: NEXUSSuitable for FORD, LuK, SACHS
- Diameter [mm]: 239
- Number of Teeth: 23
- Condition: New
-
Article №: QDF114 OEM part number: 1233682 QUINTON HAZELL Dual mass flywheelCar parts maker: QUINTON HAZELLSuitable for FORD, LuK, SACHS
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Number of Teeth: 58
- Condition: New
-
Article №: 1325100 OEM part number: 1233682 NK Clutch kit without bearing, Conversion from dual-mass flywheel to single-mass flywheel, 250mmCar parts maker: NKSuitable for FORD, LuK, SACHS
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: without bearing
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Net weight [kg]: 21,77
- Condition: New
-
Article №: FMFD005 OEM part number: 1233682 EXEDY FlywheelCar parts maker: EXEDYSuitable for FORD, LuK, SACHS
-
Article №: 61-5449 OEM part number: 1233682 MAXGEAR Clutch kit with flywheel, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: MAXGEARSuitable for FORD, LuK, SACHS
- Transmission Code: MTX75
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Transmission Type: 5-Speed Manual Transmission
- Hub Profile: 23x26 - 23N
- Friction Lining Outer Diameter [mm]: 240
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
-
Article №: ADF123506 OEM part number: 1233682 BLUE PRINT Dual mass flywheelCar parts maker: BLUE PRINTSuitable for FORD, LuK, SACHS
- Hub Inner Diameter [mm]: 36,3
- Number of EDC bores/notches: 58
- Hub mounting bore diameter [mm]: 12,0
- Hub Outer Diameter [mm]: 116,4
- Pitch Circle Diameter, hub [mm]: 87
- Number of hub mounting bores: 8
- Pitch Circle Diameter, clutch pressure plate [mm]: 260,0
- Inner Diameter Tread [mm]: 149,0
- Clutch Pressure Plate Outer Diameter [mm]: 260
- Number of clutch pressure plate mounting bores: 6
- Number of Teeth: 115
- Weight [kg]: 9,900
- Observe service information
- Condition: New
-
Article №: ADF1230134 OEM part number: 1233682 BLUE PRINT Clutch kit with flywheel, with central slave cylinder, with synthetic grease, with dual-mass flywheel, four-piece, 240mmCar parts maker: BLUE PRINTSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease, with dual-mass flywheel
- Multi-piece: four-piece
- Weight [kg]: 19,000
- Observe service information
- Condition: New
The set includes:- Central Slave Cylinder, clutch BLUE PRINT - 1 (units)
- Clutch Pressure Plate BLUE PRINT - 1 (units)
- Clutch Disc BLUE PRINT - 1 (units)
- Dual mass flywheel BLUE PRINT - 1 (units)
- Screw Set, flywheel BLUE PRINT - 1 (units)
-
Article №: ADBP300132 OEM part number: 1233682 BLUE PRINT Clutch kit with flywheel, with central slave cylinder, with synthetic grease, with dual-mass flywheel, four-piece, 240mmCar parts maker: BLUE PRINTSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease, with dual-mass flywheel
- Multi-piece: four-piece
- Weight [kg]: 18,226
- Observe service information
- Condition: New
The set includes:- Central Slave Cylinder, clutch BLUE PRINT - 1 (units)
- Clutch Pressure Plate BLUE PRINT - 1 (units)
- Clutch Disc BLUE PRINT - 1 (units)
- Dual mass flywheel BLUE PRINT - 1 (units)
- Screw Set, flywheel BLUE PRINT - 1 (units)
-
Article №: 845061 OEM part number: 1233682 VALEO Clutch kit with single-mass flywheel, with central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: VALEOSuitable for FORD, LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- Product line: KIT4P - CONVERSION KIT (CSC)
- New Part
- Weight [kg]: 17,95, 17,44
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 100
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
-
Article №: 845059 OEM part number: 1233682 VALEO Clutch kit with single-mass flywheel, with central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: VALEOSuitable for FORD, LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- Product line: KIT4P - CONVERSION KIT (CSC)
- New Part
- Weight [kg]: 18, 17,95
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 100
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
The set includes:- Central Slave Cylinder, clutch VALEO - 1 (units)
- Clutch kit VALEO - 1 (units)
-
Article №: 835061 OEM part number: 1233682 VALEO Clutch kit CONVERSION KIT, with flywheel, with screw set, with clutch disc, Special tools for mounting not necessary, with clutch pressure plate, without central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheelCar parts maker: VALEOSuitable for FORD, LuK, SACHS
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Supplementary Info: CONVERSION KIT
- New Part
- Hub Profile: 25,9 x 22,9
- Weight [kg]: 18,26, 25,2
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Extention Force [N]: 7000
- Tightening Torque [Nm]: 30
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
-
Article №: 837317 OEM part number: 1233682 VALEO Clutch kit with screw set, with dual-mass flywheel, with central slave cylinderCar parts maker: VALEOSuitable for FORD, LuK, SACHS
- Supplementary Article / Supplementary Info Info 2: with screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,28
- Condition: New
The set includes:- Central Slave Cylinder, clutch VALEO - 1 (units)
- Clutch kit VALEO - 1 (units)
- Dual mass flywheel VALEO - 1 (units)
-
Article №: 836117 OEM part number: 1233682 VALEO Dual mass flywheelCar parts maker: VALEOSuitable for FORD, LuK, SACHS
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Diameter [mm]: 240
- Number of mounting bores: 8
- Supplementary Article / Supplementary Info Info 2: with screw set
- Weight [kg]: 12,92
- Condition: New
-
Article №: FDE-FO01 OEM part number: 1233682 AISIN Dual mass flywheelCar parts maker: AISINSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Condition: New
-
Article №: SCKE-FO55R OEM part number: 1233682 AISIN Clutch kitCar parts maker: AISINSuitable for FORD, LuK, SACHSThe set includes:
- Central Slave Cylinder, clutch AISIN - 1 (units)
- Clutch kit AISIN - 1 (units)
- Dual mass flywheel AISIN - 1 (units)
-
Article №: 009-001-000102R OEM part number: 1233682 REMANTE FlywheelCar parts maker: REMANTESuitable for FORD, LuK, SACHS
- Number of mounting bores: 8
- Transmission Type: Manual Transmission
- Weight [kg]: 12,00
- Generally overhauled
- Exchange Part
- Condition: Remanufactured
-
Article №: 479C0356 OEM part number: 1233682 RIDEX Clutch kit with flywheel, with screw set, with clutch disc, Requires special tools for mounting, Dual-mass flywheel with friction control plate, with central slave cylinder, with clutch pressure plate, without pilot bearing, 240mmCar parts maker: RIDEXSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, without pilot bearing
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 14
- Number of mounting bores: 8
- Condition: New
-
Article №: 479C1103 OEM part number: 1233682 RIDEX Clutch kit with flywheel, with screw set, with clutch disc, Dual-mass flywheel without friction control plate, with central slave cylinder, with clutch pressure plate, 240mmCar parts maker: RIDEXSuitable for FORD, LuK, SACHS
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Number of mounting bores: 8
- Condition: New
-
Article №: 577F0066R OEM part number: 1233682 RIDEX REMAN Flywheel without screw set, with friction control plate, without pilot bearingCar parts maker: RIDEX REMANSuitable for FORD, LuK, SACHSCore exchange £ 62,32 core charge (incl. 20% VAT) is NOT included
The core charge will be refunded if you return the old spare part.
- Number of mounting bores: 8
- Vehicle Equipment: for vehicles with manual transmission
- Supplementary Article / Supplementary Info Info 2: without screw set, with friction control plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New