Clutch kit with OEM part number 1549359

 
  • Article №: 479C0108 OEM part number: 1549359 RIDEX Clutch kit with screw set, Special tools for mounting not necessary, with single-mass flywheel, without central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
    Car parts maker: RIDEX
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with screw set, Special tools for mounting not necessary
    • Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
    • Hub Profile: 24,2 x 21,8
    • Weight [kg]: 17,59
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Preload Force [N]: 7200
    • Condition: New
    In stock
    £ 207,10
    incl. 20% VAT, excl. delivery costs
  • Article №: 479C0345 OEM part number: 1549359 RIDEX Clutch kit with single-mass flywheel, with central slave cylinder, four-piece, Conversion from dual-mass flywheel to single-mass flywheel
    Car parts maker: RIDEX
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
    • Hub Profile: 21,6 x 24,2 - 23N
    • Multi-piece: four-piece
    • Weight [kg]: 17,72, 18,06
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Condition: New
    In stock
    £ 244,23
    incl. 20% VAT, excl. delivery costs
  • Clutch kit 1 549 359 BLUE PRINT ADV183068 OEM 1549359 BLUE PRINT Clutch kit ADV183068 for FORD
    Article №: ADV183068 OEM part number: 1549359 BLUE PRINT Clutch kit with synthetic grease, two-piece, 241mm
    Car parts maker: BLUE PRINT
    Suitable for FORD
    • Diameter [mm]: 241
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info: with synthetic grease
    • Multi-piece: two-piece
    • Weight [kg]: 6,142
    • Observe service information
    • Condition: New
    In stock
    £ 120,03
    incl. 20% VAT, excl. delivery costs
  • Article №: ADV183067 OEM part number: 1549359 BLUE PRINT Clutch kit with bolts/screws, with flywheel, with synthetic grease, three-piece, Conversion from dual-mass flywheel to single-mass flywheel, 241mm
    Car parts maker: BLUE PRINT
    Suitable for FORD
    • Diameter [mm]: 241
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with bolts/screws, with flywheel
    • Supplementary Article / Supplementary Info: with synthetic grease
    • Multi-piece: three-piece
    • Weight [kg]: 16,865
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel
    • Observe service information
    • Condition: New
    In stock
    £ 209,19
    incl. 20% VAT, excl. delivery costs
  • Dual mass flywheel 1 549 359 BLUE PRINT ADV183512 OEM 1549359 BLUE PRINT Dual mass flywheel ADV183512 for FORD
    Article №: ADV183512 OEM part number: 1549359 BLUE PRINT Dual mass flywheel
    Car parts maker: BLUE PRINT
    Suitable for FORD
    • Hub Inner Diameter [mm]: 32,9
    • Number of EDC bores/notches: 58
    • Hub mounting bore diameter [mm]: 12,1
    • Hub Outer Diameter [mm]: 44,9
    • Pitch Circle Diameter, hub [mm]: 75
    • Number of hub mounting bores: 6
    • Pitch Circle Diameter, clutch pressure plate [mm]: 258
    • Inner Diameter Tread [mm]: 167,4
    • Clutch Pressure Plate Outer Diameter [mm]: 244
    • Number of Teeth: 137
    • Weight [kg]: 11,500
    • Observe service information
    • Condition: New
    Сurrently out of stock
    £ 362,12
    incl. 20% VAT, excl. delivery costs
    This item is out of stock. Please select another item.
    Add to basket
  • Article №: ADV1830150 OEM part number: 1549359 BLUE PRINT Clutch kit with flywheel, with central slave cylinder, with synthetic grease, with flywheel screws, with pressure plate screws, with dual-mass flywheel, four-piece, 240mm
    Car parts maker: BLUE PRINT
    Suitable for FORD
    • Diameter [mm]: 240
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with flywheel
    • Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease, with flywheel screws, with pressure plate screws, with dual-mass flywheel
    • Multi-piece: four-piece
    • Weight [kg]: 16,852
    • Observe service information
    • Condition: New
    In stock
    £ 492,92
    incl. 20% VAT, excl. delivery costs
  • Article №: SL 4DS1054 OEM part number: 1549359 STARLINE Clutch kit without clutch release bearing, with flywheel, with clutch disc, with screw set, with clutch pressure plate, Conversion from dual-mass flywheel to single-mass flywheel, 240mm
    Car parts maker: STARLINE
    Suitable for FORD
    • Diameter [mm]: 240
    • Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with flywheel, with clutch disc, with screw set
    • Supplementary Article / Supplementary Info: with clutch pressure plate
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel
    • Condition: New
    Сurrently out of stock
    £ 128,22
    incl. 20% VAT, excl. delivery costs
    This item is out of stock. Please select another item.
    Add to basket
  • Article №: SKCK-0100107 OEM part number: 1549359 STARK Clutch kit with screw set, Special tools for mounting not necessary, with single-mass flywheel, without central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
    Car parts maker: STARK
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with screw set, Special tools for mounting not necessary
    • Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
    • Hub Profile: 24,2 x 21,8
    • Weight [kg]: 17,59
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Preload Force [N]: 7200
    • Condition: New
    In stock
    £ 114,06
    incl. 20% VAT, excl. delivery costs
  • Article №: SKCK-0100346 OEM part number: 1549359 STARK Clutch kit with flywheel, with clutch disc, with clutch pressure plate, with central slave cylinder, four-piece, Conversion from dual-mass flywheel to single-mass flywheel, 240mm
    Car parts maker: STARK
    Suitable for FORD
    • Diameter [mm]: 240
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
    • Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
    • Hub Profile: 21,6 x 24,2 - 23N
    • Multi-piece: four-piece
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel
    • Condition: New
    In stock
    £ 174,24
    incl. 20% VAT, excl. delivery costs
  • Article №: HKR1045 OEM part number: 1549359 BORG & BECK Clutch kit 240mm
    Car parts maker: BORG & BECK
    Suitable for FORD
    • Diameter [mm]: 240
    • Hub Profile: 24.2 x 21.8
    • Specification: REPLACEMENT KIT
    • only in connection with: Borg & Beck SMF
    • Manufacturer Restriction: Borg & Beck Flywheel
    • Condition: New
    Сurrently out of stock
    £ 151,29
    incl. 20% VAT, excl. delivery costs
    This item is out of stock. Please select another item.
    Add to basket
  • Article №: HKF1040 OEM part number: 1549359 BORG & BECK Conversion Set, clutch
    Car parts maker: BORG & BECK
    Suitable for FORD
    • Number of Teeth: 23
    • Hub Profile: 24.2 x 21.7
    • Diameter [mm]: 240
    • Specification: SOLID FLYWHEEL KIT
    • Condition: New
    Сurrently out of stock
    £ 258,32
    incl. 20% VAT, excl. delivery costs
    This item is out of stock. Please select another item.
    Add to basket
  • Article №: STO1040 OEM part number: 1549359 STORM QUALITY PARTS Clutch kit with clutch disc, without clutch release bearing, with screw set, with single-mass flywheel, with clutch pressure plate, Conversion from dual-mass flywheel to single-mass flywheel
    Car parts maker: STORM QUALITY PARTS
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, with screw set
    • Supplementary Article / Supplementary Info: with single-mass flywheel, with clutch pressure plate
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Condition: New
    Сurrently out of stock
    £ 236,61
    incl. 20% VAT, excl. delivery costs
    This item is out of stock. Please select another item.
    Add to basket
  • Article №: 415 0654 10 OEM part number: 1549359 LuK Dual mass flywheel
    Car parts maker: LuK
    Suitable for FORD
    • Transmission Type: Manual Transmission
    • Supplementary Article / Supplementary Info Info 2: with screw set, Dual-mass flywheel with friction control plate
    • Number of mounting bores: 6
    • Max. Clearance Angle [Degree]: 19
    • Number of teeth (finding the max. clearance angle): 7
    • max. side clearance [mm]: 2,9
    • Supplementary Article / Supplementary Info: without pilot bearing
    • Condition: New
    In stock
    £ 276,19
    incl. 20% VAT, excl. delivery costs
  • Article №: 600 0013 00 OEM part number: 1549359 LuK Clutch kit with flywheel, with screw set, Dual-mass flywheel with friction control plate, with central slave cylinder, without pilot bearing
    Car parts maker: LuK
    Suitable for FORD
    • Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
    • Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
    • Product line: BR 0241
    • Number of teeth (finding the max. clearance angle): 7
    • max. side clearance [mm]: 2,9
    • Max. Clearance Angle [Degree]: 20
    • Number of mounting bores: 6
    • Condition: New
    The set includes:
    In stock
    £ 398,07
    incl. 20% VAT, excl. delivery costs
  • Article №: 836225 OEM part number: 1549359 VALEO Dual mass flywheel
    Car parts maker: VALEO
    Suitable for FORD
    • Engine Features/Arrangement: for engines with dual-mass flywheel
    • for flywheel manufacturer: LUK
    • Diameter [mm]: 289
    • Number of mounting bores: 6
    • Supplementary Article / Supplementary Info Info 2: with screw set
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • for flywheel depth [mm]: 60,73
    • Weight [kg]: 11,65
    • Condition: New
    In stock
    £ 301,59
    incl. 20% VAT, excl. delivery costs
  • Article №: 836595 OEM part number: 1549359 VALEO Dual mass flywheel
    Car parts maker: VALEO
    Suitable for FORD
    • Engine Features/Arrangement: for engines with dual-mass flywheel
    • for flywheel manufacturer: SACHS
    • Diameter [mm]: 289
    • Number of mounting bores: 6
    • Supplementary Article / Supplementary Info Info 2: with screw set
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 50
    • for flywheel depth [mm]: 53,23
    • Weight [kg]: 12,155
    • Condition: New
    In stock
    £ 304,50
    incl. 20% VAT, excl. delivery costs
  • Article №: 835050 OEM part number: 1549359 VALEO Clutch kit with screw set, Special tools for mounting not necessary, with single-mass flywheel, without central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
    Car parts maker: VALEO
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with screw set, Special tools for mounting not necessary
    • Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
    • Product line: KIT4P - CONVERSION KIT
    • New Part
    • Hub Profile: 24,2 x 21,8
    • Weight [kg]: 17,59
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Condition: New
    In stock
    £ 340,33
    incl. 20% VAT, excl. delivery costs
  • Article №: 845050 OEM part number: 1549359 VALEO Clutch kit with single-mass flywheel, with central slave cylinder, Conversion from dual-mass flywheel to single-mass flywheel
    Car parts maker: VALEO
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
    • Product line: KIT4P - CONVERSION KIT (CSC)
    • New Part
    • Weight [kg]: 17,72, 18,06
    • Clutch: Conversion from dual-mass flywheel to single-mass flywheel
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Condition: New
    The set includes:
    In stock
    £ 325,95
    incl. 20% VAT, excl. delivery costs
  • Article №: 837304 OEM part number: 1549359 VALEO Clutch kit with screw set, with lock screw set, with dual-mass flywheel, with central slave cylinder
    Car parts maker: VALEO
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
    • Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
    • Product line: FULLPACK DMF (CSC)
    • New Part
    • Weight [kg]: 16,85, 18,5
    • for flywheel manufacturer: LUK
    • Number of mounting bores: 6
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 90
    • Clutch Pressure Plate Outer Diameter [mm]: 241
    • Condition: New
    The set includes:
    In stock
    £ 398,39
    incl. 20% VAT, excl. delivery costs
  • Clutch kit 1 549 359 VALEO 837415 OEM 1549359 VALEO Clutch kit 837415 for FORD
    Article №: 837415 OEM part number: 1549359 VALEO Clutch kit with screw set, with lock screw set, Special tools for mounting not necessary, with dual-mass flywheel, with central slave cylinder
    Car parts maker: VALEO
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
    • Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
    • Product line: FULLPACK DMF (CSC)
    • New Part
    • Weight [kg]: 18,25
    • for flywheel manufacturer: SACHS
    • Number of mounting bores: 6
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 50
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Condition: New
    The set includes:
    In stock
    £ 575,09
    incl. 20% VAT, excl. delivery costs
  • Clutch kit 1 549 359 VALEO 836600 OEM 1549359 VALEO Clutch kit 836600 for FORD
    Article №: 836600 OEM part number: 1549359 VALEO Clutch kit with flywheel, with clutch disc, without clutch release bearing, with clutch pressure plate, for engines with dual-mass flywheel
    Car parts maker: VALEO
    Suitable for FORD
    • Number of Teeth: 23
    • Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc, without clutch release bearing
    • Supplementary Article / Supplementary Info: with clutch pressure plate
    • Product line: MODULE DMF
    • New Part
    • Engine Features/Arrangement: for engines with dual-mass flywheel
    • Weight [kg]: 18,5
    • Clutch Pressure Plate Outer Diameter [mm]: 240
    • Condition: New
    The set includes:
    Сurrently out of stock
    £ 602,62
    incl. 20% VAT, excl. delivery costs
    This item is out of stock. Please select another item.
    Add to basket
  • Article №: 577F0047R OEM part number: 1549359 RIDEX REMAN Flywheel 289mm, with screw set
    Car parts maker: RIDEX REMAN
    Suitable for FORD
    Core exchange £ 62,32 core charge (incl. 20% VAT) is NOT included

    The core charge will be refunded if you return the old spare part.

    • Diameter [mm]: 289
    • Number of mounting bores: 6
    • Supplementary Article / Supplementary Info Info 2: with screw set
    • Engine Features/Arrangement: for engines with dual-mass flywheel
    • Weight [kg]: 12,155
    • for flywheel depth [mm]: 53,23
    • for flywheel manufacturer: SACHS
    • Tightening Torque [Nm]: 60
    • Tightening angle [degrees]: 50
    • Condition: New
    In stock
    £ 313,28
    incl. 20% VAT, excl. delivery costs